DIY Utensil Holders And Name Tags + SVG Cut Files

Are you ready to make DIY Utensil Holders? Or are you looking for Cricut Crafts to make? Grab our Cricut craft tutorial and learn how to DIY Burlap Bunny Utensil Holders -These are a perfect addition to make for Spring crafts, or Easter Crafts, Summer crafts or a bunny-themed party… The DIY silverware pockets can be made with or without the bunny ears, making this an easy craft to make with your die-cutting machine. 

This tutorial includes the SVG cut files and a template to help you make your own silverware pockets. The SVG cut files can be used with other cutting machines besides the Cricut too. But, don’t run if you don’t have a Cricut or other cutting machine because we have another tutorial for DIY burlap utensil holders where you don’t need a cutting machine at all. We like to keep things easy to make for everyone! 

DIY Utensil Holder 

DIY Burlap Utensil Holder With Cut Out Butterfly Seating Tag -

  • Affiliate links may be included in this post. We earn a small commission from qualifying purchases. At no additional cost to you.

We love decorating our tables for celebrations (even if it’s just the family at no with no guests) and making easy DIY decorating projects. Do you? I recently updated my original utensil holder tutorial (link below). This got me thinking of all the other cute ideas to make for table settings to try and make with my Cricut. Not to mention how many times I walk by my Cricut but, hadn’t designed or made anything lately. I decided to hop to it! 

Uses for this DIY silverware pocket/ DIY Utensil Holder

Use it for spring celebrations, for your Easter table settings, baby showers, kid’s themed parties, Mother’s Day table settings, Summer parties, party table settings or wedding table settings, anytime you are looking for a rustic table setting. (Perfect for a DIY wedding)…

Note: If you prefer not to make it with bunny ears you can. Just cut it straight across and omit the ears. 

Don’t forget to make your own napkin rings! Make a napkin ring out of wood beads! It’s so easy. Just string the beads on the elastic line and tie off at the end. Insert napkin through the hole. 

Use a homemade or store-bought burlap table cloth or table runner, along with this DIY Silverware pocket or our previous tutorial – DIY Burlap Utensil Holders (With Lace). Perfect for any occasion and so easy to make with its sew and no-sew directions. It’s a quick and easy no-sew project for burlap utensil holders (no die-cutter) turn out super cute! 

  • Working in the Cricut Design Space is really easy when you get used to it. I hope this helps you get started creating with this free software.
  • This tutorial is great for anyone who owns a Cricut. Even if you are a beginner I think you can do it by following the directions.
  • Or again, you are more than welcome to use our other (tutorial) with no die cutter required. 
  • Let’s hop to today’s craft project. 

DIY Burlap Utensil Holder – (Bunny)

Cricut Maker, craft supplies for making DIY burlap utensil holders for spring or Easter table settings, bunny template...- Cricut Crafts Tutorial at


How To Cut And Make Utensil Holders With a Cricut Maker

How To cut Name Tags With a Cricut Maker 


Sign in to your account. Or sign up for a free Design Space Account.

Cut out the designs after uploading the SVG files here is how to upload the SVG files and cut your files. 


Image Templates for Untensil Holder, Bunny, Butterfly, Flower, Oval Egg Shape (which are what the SVG files look like cut with a die cutter-

Step 1

  1. Upload the SVG file to Cricut Design Space. Go to (NEW) project on the left side panel, click (NEW) to start your new project. Then see (upload) on the left side panel click (upload) to start to load your SVG files. On the upload screen, you have two options. Pick (IMAGE) to upload the SVG files. Add to To Your Work Space on Cricut Design Space. If you are not sure how to upload your images into Design Space view the PDF I have made and linked below. 
  2. Don’t forget to select the cutting machine you are working on, when in the workspace after the files are loaded. You will find it on the top right (In black area) where it says Explore. It’s a drop-down selection. Pick your cutting machine, then continue. 
  3. Highlight all layers and ungroup to work on each layer separately.

Easter place setting cut -

Step 2

Turn off all the other layers – Do this by using the eye icon on the right-hand side of the layers panel, while leaving the purple ear tracing template visible.

Set material to cut to CARDSTOCK -


After, hit make it cut as normal. 

Step 3

Begin working on the place setting tags - see full cutting instructions, SVG files and templates at

After, hit make and this is how your mat should look. If all looks correct, hit continue and adjust your material dial or setting to medium card stock, more pressure.

  1. Load the card stock on to a blue light grip mat and hit go

Step 4

Begin working on the place setting name tags

  1. Add and adjust the text in the design space using the text feature and layer on top of each tag. 

**NOTE: Tags are colored in design space. If the color is not adjusted to white before printed they will print as the color you see. If you would like tags to be white or you would like to print and cut on colored paper (only maker machines can print and cut on colored paper) change the color to white AFTER text is layered. 

Step 5

Select both layers (tag and text) and once ready, hit flatten to create a print and cut layer. Flattening will do exactly that, flatten multiple layers as one. After, select make it, to continue to print then cut. 

NOTE: Skip this step and just cut as normal if you would like it to be blank or add a handwritten name by lettering the name with a pen or sharpie. 

Names ready to be printed on place setting tags - full instructions at


This is how each tag should look before printing.

Step 6

This is how the words should look prior to cutting them in the design space - Full DIY at

After, hit make and this is how your mat should look.

Don’t be alarmed, the black outline of the tag will disappear until ready to cut. Only the registration lines will be visible for your machine to read where cuts will be made. 

Step 7

Hit continue and print, see instruction notes and directions for cutting files with a die cutter machine -

Hit continue and print. Once the print is complete, adjust your material dial or setting to medium card stock, more pressure.

  • REMINDER: Only maker machines will be able to print and cut on colored paper.
  • Air Explore machines will need to be printed on white paper but will be able to print text in color

Step 8

After all the pieces are cut, use the ear tracing template and trace the top of the ears adding it onto the rectangle. Full instructions

Once all pieces are cut, use the ear tracing template and trace the tops of the ears on the burlap spool. 

Inserting paper into the Cricut Maker to cut the template for utensil holder - Cricut Crafts, DIY and Instructions at

Step 9

Cut the ears and leave the rest attached to the spool of burlap.

Bunny Utensil Template cut out and tracing Template onto Burlap - DIY - Cricut Craft at

Step 10

Line up the silverware to determine how long will be needed to cut and fold over to create the pocket. 

Using hot glue to glue the burlap bunny utensil holder - DIY silverware holder at

Step 11

After the length is cut, line up the edges and apply a line of hot glue down each side.

Cutting ribbon to add cute name tags cut out with SVG files on a Cricut. Find this Cricut Craft and free SVG files at

Step 12

Tie a ribbon into a bow from the back of the pocket to the front and add the tags previously cut and you’re finished! 

DIY Utensil Holder – (Bunny)

Can you make these from other fabrics instead of burlap?

Yes, cut the template with the SVG files, then follow the same directions but, mark your fabric with a washable fabric pen and assemble using fabric glue or even sew vs. hot glue gun. Then follow the steps 9-12 to complete the project. 

DIY Bunny Untensil Holders and Name Cards - How to instructions for this No-SEW project plus template and SVG files included.

Are you making these for Easter? Even if it’s just for you and the family this is an easy way to decorate your tables to celebrate or have a bunny-themed party… Not using it now, be sure to pin it for later! 

You might try making this Easter Craft and this DIY for how to decoupage wooden eggs and make a spring/Easter Centerpiece.

Looking for more ideas to make? 

Related Content 

Cricut Crafts

  1. How To Make Iron-on Onesies and T-Shirts Like A Pro

Wedding, Event, Party and Burlap Crafts 

  1. Burlap Wedding Banner DIY 
  2. Love Is Sweet Wedding Banner
  3. How To Make A Boutonniere 
  4. DIY Mustache Props – Tutorial (Fun wedding or party idea)
  5. DIY Upcycled Utensil Holder (To Match Your Theme/Party or Event)
  6.  DIY Burlap Utensil Holders (With Lace)

DIY Burlap Utensil Holders (With Lace)

DIY Burlap Utensil Holders - Burlap and Lace Utensil holder tutorial sew and no-sew options make this an easy project that anyone can make! Great for table settings, weddings and #DIY

Looking for more fall crafts or content? 

  1. You might want to make some Velvet Pumpkins to go with these! Visit this pumpkin decor DIY post to see this easy how-to, grab a tutorial to give it a try!
  2. Fall Craft Ideas
  3. See all our Craft Ideas 

Helpful posts that are related

The post DIY Utensil Holders And Name Tags + SVG Cut Files appeared first on Dear Creatives.